Oscilloscopio doppia traccia 20 MHZ Protek P3502C - AriVigevano 2018

ARIVIGEVAN                IQ2VJ                                           
Associazione Radioamatori Italiani  -  Sezione Fondata nel 1956
Vai ai contenuti
ARI Vigevano è partner del
Museo della
Tecnica Elettrica
Università di Pavia

Oscilloscopio doppia traccia 20 MHZ Protek P3502C

Vendo :

Oscilloscopio dopia traccia 20 MHZ Protek P3502C

Euro : 150,00

Tel. 339 65 79 715

Caratteristiche :
Vertical Amplifier   (CH 1 and CH 2)
Sensitivity   5mV/Div to 5V/Div in 10 steps (1-2-5 seq)
X5 Mag:   1mV/Div to 1V/Div
Accuracy   ±3% (±5% in X5 Mag)
Bandwith   (-3dB) DC to 60MHz
Rise Time   < 5.8ns
Input Impedance   1MW + 25pF
Input Coupling   AC-Gnd-DC
Invert Channel   CH2
Display Modes   CH1, CH2, Add, Dual
Chop Frequency   250kHz ±3%
Maximum Input Voltage    400V (DC or AC peak)
CH1 Signal Output    20mV into 50W: (50Hz to 5MHz)
Horizontal Sweep
Sweep Time    0.1µs/Div to 0.2s/Div in 20 calibrated steps (1-2-5)
X10 Mag:   10ns/Div to 20ms/Div
Accuracy    ±3% (±5% in X10 Mag)
Display Mode    A, Alt-Mag, XY Dual
Sweep Magnifier    X10 ±5%
Trace Sep   1.5 Div Min

Horizontal Amplifier
Linearity   ±3% (±5% in X10 Mag)
X-Y Mode CH 1-X axis, CH 2-Y axis
Sensitivity   Same as CH 1 Vertical Amplifier
Bandwidth DC :   DC to 500kHz
AC:   10Hz to 500kHz
Phase Error   £ 3° DC to 50kHz

Source     CH1, CH 2, Line, EXT
Coupling    AC
Modes    Auto, Norm, TV-V, TV-H
Slope   Positive or Negative
Trigger Sensitivity Int:
DC to 5MHz: 0.5 Div
5MHz to 40MHz: 1.5 Div;
40MHz to 60MHz: 2.5 Div
Ext: DC to 5MHz:  200mV  P-P
5MHz to 40MHz:   800mV P-P
40MHz to 60MHz:   1V P-P
TV:   Int: 1 Div Min; Ext: 1 V P-P Min
TV-H (Television Line synchronizing Freq)
TV-V (Television Frame synchronizing Freq)
Automatically switched by the A Time/Div Front panel control
External Trigger Input Impedance:   1MW + 20 pF
Maximum Input Volts:  300V (DC or AC peak)

Z Axis Modulation
Sensitivity ±5V P-P Intensity increases with a negative going voltage input
Bandwidth   (-3dB) DC to 2MHz
Input Impedance   Approx. 33 KW
Maximum Input Voltage   30V (DC or AC peak)

Calibrator Signal
Frequency Approx.   1kHz (±20%)
Voltage   0.5V P-P ±3%
Duty Cycle    Approx. 50%

Type 6" rectangular CRT with illuminated internal 8 X 10 Div graticule (1 Div = 1cm)
Acceleration Voltage   10 kV

General Specification
Power Requirements   AC Input Voltage: 100V, 120V, 220V, 240V ±10% selectable
Frequency   50/60Hz
Power Consumption   55W
Operating Temperature   0 to 40°C
Dimensions   5.3" H x 13.4" W x 14.8" D
Weight   24 lbs.
Supplied Accessories    Manual, AC Power cord, (2) X1/X10 Probes

Torna ai contenuti